~华哥~ 发表于 2009-8-20 10:09:23

MasterCAM X4 正式版下载+{Crak}

本帖最后由 ~华哥~ 于 2009-8-21 13:45 编辑

**** Hidden Message *****

{Crak}下载下载指导:
http://bbs.21mould.netdata/attachment/month_0908/0908182209b529a15b1d533084.gif.thumb.jpg




MasterCAM X4 正式版中文安装说明:

1.安装Mastercam X4, 安装时选择Sim Type为"NetHASP"
2.运行 "mastercam_x4_nethasp_crk.exe", 并浏览到MacterCAM X4安装目录下的"mastercam.exe"选定后点"Start"(开始)键以修补文件.
3.如果计算机以前安装过Mastercam X3并选择的 Sim Type为"HASP"的.需先在注册表中删除注册项:
4.运行"mastercam-dealer-unlim.reg"导入"Delear"类型许可证.或运行"mastercam-industrial-unlim.reg"导入工业许可证.(两者选一运行即可)
5.如果之前已安装过"USB-Emulator"重启即可.
6.如果之前没安装过"USB-Emulator"请对应你的系统选择下列操作:
32位系统:
1) 打开文件夹"USB-Emul_Win32" 运行 "install.bat"
2) 等待程序找到并安装好硬件.
64位系统:
你需要以管理员身份来操作!
1) 开始菜单-控制面板-添加硬件(选:是的,我已连接了此硬件)-添加新的硬件设备-安装我手动从列表选择的硬件-显示所有设备-从磁盘-浏览(浏览到文件夹"USB-Emul_Win64")确认安装没经Windows认证的驱动程序.
2) 如果安装成功能在系统中看到一个新的硬件:
    设备管理器 -> 系统设备 -> Virtual Usb Bus Enumerator
3) 重启系统
2009/6/7
__________________________________________________________________
英文安装说明:
1) Install Mastercam X4, select Sim Type > NetHASP
2)Run "mastercam_x4_nethasp_crk.exe", browse to <mastercam X4 progdir\mastercam.exe> click Start > OK
3) If you have got Mastercam X3 installed as Sim Type > HASP you need to delete old dump from Windows Registry!
Delete Registry Entry

4) Run "mastercam-dealer-unlim.reg" to use Mastercam with Delear type of license or "mastercam-industrial-unlim.reg" to use it with Industrialtype of license
5) If you have "USB-Emulator" already installed just restart (or reboot a computer) it so it can read a new dump
6) If you have no USB-Emulator installed you need to install it. For more infor see "USB-Emul Win32 Setup" or "USB-Emul Win64 Setup" next

That's all.. Enjoy :)
__________________________________________________________________
USB-Emul Win32 Setup
1) Open folder "USB-Emul_Win32" and run "install.bat"
2) Wait until system will find and install new devices
__________________________________________________________________

USB-Emul Win64 Setup
You need a local Administrator rights to install this emulator for Win64!

1) Start ->       Control Panel -> Add Hardware (Yes, I have already connected the hardware) -> Add a new hardware device -> Install the hardware that I manually select from a list -> Show all Devices -> Have disk -> Browse -> (browse to folder "USB-Emul_Win64")
Confirm to install not certificated drivers if Windows ask for..
2) If setup is succesfull you have to see new system device
Device Manager -> System devices -> Virtual Usb Bus Enumerator
3) Reboot!!!

摄摄天使 发表于 2015-2-25 19:07:25

路过,支持世纪模具浮雕论坛

lvyonghua 发表于 2014-12-8 23:56:46

法国恢复规划方

pzq123 发表于 2015-6-8 19:39:40

怎么下载呢

xiaokun1212 发表于 2009-8-20 10:49:16

正式版还没有吧。!!

xiaokun1212 发表于 2009-8-20 10:51:01

Crak??????

813yys 发表于 2009-8-20 11:04:35

真的出来啦

wgg008802 发表于 2009-8-20 17:36:47

顶楼主,这个我找了很久了

wgg008802 发表于 2009-8-20 19:35:07

老大,Crack还差一个分卷啊

~华哥~ 发表于 2009-8-21 13:48:01

{Crak}重新上传了,大家放心下载

jackyzht 发表于 2009-8-21 14:49:36

本帖最后由 jackyzht 于 2009-8-22 01:51 编辑

装了不能用
出现No SIM found
而且连我X3版也毁掉了
急盼解决发法

xiaokun1212 发表于 2009-8-21 19:20:10

又是一个网络版(NetHASP)假装正式版,晕。。。。
jackyzht 发表于 2009-8-21 14:49 http://bbs.21mould.net/images/common/back.gif
!(NetHASP)这是什么意思啊??

xiaokun1212 发表于 2009-8-21 19:21:39

按照步骤安装,结束后出错误!!!! No SIM found
不知道是怎么回事?

jack6421 发表于 2009-8-21 21:36:13

希望能用,感謝中

yhjiao 发表于 2009-8-21 22:33:26

不要运行"mastercam-industrial-unlim.reg",否则,4轴,5轴用不了,请一定注意!!!

ROOCE 发表于 2009-8-22 14:29:02

MasterCAM X4 正式版下载+{Crak 好想用啊!!!

duanzanrensheng 发表于 2009-8-23 11:36:26

有没有hasp的{Crak}文件啊?

liu7860361 发表于 2009-8-23 22:11:15

卡卡卡卡卡卡卡卡卡卡卡卡
页: [1] 2 3 4 5 6 7 8 9 10
查看完整版本: MasterCAM X4 正式版下载+{Crak}

jdpaint培训